PB-WebImage_SPW911-1600x779

SPW911

ISSUE ARCHIVES

Issue 42-2 - Jan/Feb 2026
Volume 42 Issue 1
Issue 41-6 - Nov/Dec 2025
Volume 41 Issue 6
Volume 41 Issue 5
Volume 41 Issue 4
Volume 41 Issue 3
Volume 41 Issue 2
Volume 41 Issue 1
Volume 40 Issue 6
Volume 40 Issue 5
Volume 40 Issue 4
Volume 40 Issue 3
Volume 40 Issue 2
CLICK TO VIEW
CLICK TO VIEW
CLICK TO VIEW

DEEP FOUNDATIONS

Pile hammers install deep foundations by delivering repeated impact energy that pushes piles into the ground. The amount of energy delivered affects penetration speed and final pile capacity. Photo Credit: JUWEl Machinery
How Engineers Choose the Right Pile Hammer for Different Soil Conditions
10 Hard Truths About Pile Driving in the Private and Public Sectors
Reaction systems provide the resisting force required to apply load during static pile load testing. Any movement or instability in the reaction system can directly affect test accuracy. Photo Credit: WB Equipment
Why Reaction Systems are the Most Critical Variable in Static Pile Load Testing

MARINE CONSTRUCTION

Marine pile driving projects may fall under either state workers’ compensation statutes or the federal Longshore and Harbor Workers’ Compensation Act depending on job location and duties. This jurisdictional distinction can significantly affect benefit levels and employer insurance costs.
Protected: Workers’ Compensation Challenges in Marine Pile Driving
Saltwater accelerates corrosion through chloride induced pitting and crevice attack. Routine freshwater rinsing significantly reduces chloride concentration on exposed metal surfaces. Photo Credit: Allied Power Products
Hoist Maintenance Tips for Harsh Marine Environments
Marine construction projects are directly influenced by tides, wind, and wave action, which can affect equipment stability and personnel safety. Proactive environmental and stability planning reduces operational uncertainty.
Protected: Risk Management Tips for Marine Piling Contractors: Safeguarding Against Over-Water Exposures

GEOTECH ENGINEERING

Soft ground conditions such as loose sands, soft clays, and uncontrolled fill can lead to excessive settlement if not addressed properly. Modern geotechnical engineering uses investigation and ground improvement to manage these risks before construction begins. Photo Credit: Garbin Geostructural Group LLC
Protected: Building on Soft Ground: How Engineers Make Marginal Sites Buildable
Geotechnical Baseline Reports (GBR)
Meeting the Power Grid Challenge: Quality Control for Transmission Foundations with TIP
ECA

GENERAL CONSTRUCTION

From the OSHA Files: Pile Driving, Drilling, and Marine Construction Incidents
Why 2026 is the Year to Exit Your Niche Construction Business
Cutting, Welding, and Cylinder Storage

STEEL PILING

Aluminum sheet piling systems can provide the stiffness of a structural metal while weighing significantly less than traditional carbon steel sheet piles. This combination of strength and reduced weight can simplify handling and installation in waterfront projects. Photo Credit: CMI Limited Co.
How Aluminum Sheet Piling Supports Low-Maintenance Seawalls
Steel sheet piling is widely used for cofferdams, bulkheads, and excavation support because its interlocking sections create continuous retaining walls. Proper inspection of interlocks and corrosion condition is critical when reselling used piles.
Maximizing Value from Surplus Steel Sheet Piling: Strategies for Contractors to Sell Excess Inventory Quickly
Fibre optic inspection systems can verify that interlock cavities are clean and unobstructed before sealing. This documentation strengthens quality assurance programs and supports regulatory compliance in remediation projects. Photo Credit: Waterloo Barrier
Why Sealed Sheet Pile Interlocks Matter in Environmental Remediation Projects

PROJECTS

SF Marina Delivers Engineered Floating Concrete Dock Systems for Tahiti Fishing Cooperatives
ShibataFenderTeam Equips Nador West Med, New Port in Morocco
28 Units from Bauer in Use for New Rapid Transit Line in Türkiye

INDUSTRY NEWS

Used Pile Driving Equipment for Sale

For more information, contact Willie Kirch at 201-786-3354 or at williekirch@gmail.com. For more information, contact…

TEI Spring Hollow Bar Seminar Set for April 15–16 in North Carolina

TEI Rock Drills and Foothills Drilling Equipment have opened registration for the TEI Spring Hollow…

RPI Liquidates Clamshell Buckets and Rock Grapples

RPI Construction Equipment has released its Clamshell Bucket and Crane Rock Grapple Liquidation Catalog, offering…

Used Pile Driving Equipment and Power Units

RPI Liquidates Vibratory Hammers Inventory

RPI Construction Equipment has announced the liquidation of its top-mount vibratory pile drivers and hydraulic…

First Poseidon Jackup Site Visit Set for March 31

Marine Equipment Solutions has announced its first official site visit event for the Poseidon Jackup…

FEATURED VIDEO