
The hurricane-proof seawall checklist
The morning after a major storm shows which seawalls were built to last. This Pile Buck article gives ten tips for seawall planning, construction, and record keeping.
Read the full storyCompare seawall and retaining wall products and request quotes from two suppliers.
A quick starting point. Your engineer and the supplier have the final say.
| If you need | Start with | Why | Watch for |
|---|---|---|---|
| A new seawall or bulkhead in salt water | Vinyl form filled with reinforced concrete | The concrete carries the load and the vinyl shields it from salt water. | Confirm the wall height, the rebar, and the embedment with your engineer. |
| A wall in rock or coral | A wall system the supplier rates for rock or coral | Not every wall can be driven into rock. | Ask the supplier how the wall is installed in your soil. |
| To relieve water pressure behind a wall | Weep hole filters | They let water drain and hold the soil in place. | Size and space them for the wall and the backfill. |
| Drainage you can maintain | Maintainable weep hole filters | The filter cartridge can be removed and cleaned from the face of the wall. | Plan access to the wall face for cleaning. |
| To stop soil loss through an existing wall | Retrofit weep hole filters | Filters can be cored into steel, vinyl, concrete, and timber walls. | Check the wall material and the hole size before you order. |
Each company’s range, in its own words, so you know who to call first.
| Supplier | Products |
|---|---|
| JET Filter System | Maintainable weep hole filters; Open-end and closed-end units; Stainless steel and ABS models; Filters for steel, vinyl, concrete, and timber walls |
| Truline | Vinyl forms filled with reinforced concrete; Dual-interlocking joints; Corner and radius parts; Seawalls, bulkheads, and retaining walls |
Swipe sideways to see every column.
Taken from each company’s listing in this guide. Most suppliers carry more than is shown here.
A Pile Buck article on seawall design and construction, and what a supplier will ask you for.

The morning after a major storm shows which seawalls were built to last. This Pile Buck article gives ten tips for seawall planning, construction, and record keeping.
Read the full storyShort answers. Select a question to open it.
A seawall protects the shore from waves. A bulkhead mainly holds back soil at the water’s edge. A retaining wall holds back soil on land. The same products often serve all three.
Water builds up behind a wall and pushes on it. Drainage relieves that pressure. Without it, water finds its own way out and carries soil with it, which leaves voids behind the wall.
It is a drain through the wall with a filter that lets water out and keeps soil in. Maintainable filters can be cleaned from the face of the wall.
Yes. They can be cored into steel, vinyl, concrete, and timber walls. Ask the supplier which model fits your wall.
It depends on the material, the design, and the water. Ask each supplier for the design life of its product and the test data behind it.
Yes for most walls. The wall height, the soil, and the loads decide the design, and many jurisdictions require stamped drawings and a permit.
Contact each company directly for pricing, availability, and details for your project.

Makes maintainable weep hole filters that relieve water pressure behind walls.
Description
JET Filter System makes maintainable weep hole filters that relieve hydrostatic pressure behind earth-retaining structures and keep soil from washing out. The company is based in Casey, Illinois.
Products and services
107 NW 1st Street, Casey, IL 62420

A seawall and retaining wall system that combines a vinyl form with steel-reinforced concrete.
Description
Truline is a seawall, bulkhead, and retaining wall system that uses a vinyl form filled with steel-reinforced concrete. It is manufactured and sold by Formtech Enterprises in Athens, Georgia.
Products and services
Athens, GA
[email protected]