LATEST ISSUES OF PILE BUCKAll issues →
Buyers Guides › Tires, Tracks & Wear Parts
2027 Buyers Guide

Tires, Tracks & Wear Parts

Compare tires, track pads, and wear parts and request quotes from two suppliers.

Featured suppliers

Start here

Which part for which machine

A quick starting point. Your mechanic and the supplier have the final say.

If you needStart withWhyWatch for
Tires for port and yard equipmentPort equipment tireIt is built for heavy loads, tight turns, and long hours.Match the load rating and the duty cycle to the machine.
Tires for loaders, excavators, and telehandlersConstruction equipment tireThe tread and the casing suit rough ground and heavy loads.Check the size, the ply or load rating, and the tread for the surface.
No flats on a rough or debris-covered siteSolid tireA solid tire cannot be punctured.It rides harder and builds heat at speed.
To protect pavement from steel tracksRubber or polyurethane track padThe pad keeps steel off the surface.Check the pad type (bolt-on, clip-on, or chain-on) and the shoe size.
To replace worn undercarriage partsTrack rollers, idlers, and track chainsWorn parts wear the rest of the undercarriage faster.Match the parts to the machine model and inspect the whole system.
To replace the rubber in a vibratory hammerRubber buffer (elastomer)It isolates the vibration from the crane or the excavator.Heat breaks rubber down, so check the fit and the duty.
Compare

What each supplier lists

Each company’s range, in its own words, so you know who to call first.

SupplierParts and products
EverpadsRubber and polyurethane track pads; Undercarriage components; Rubber buffers for vibratory hammers; Milling teeth, conveyor belts, and auger blades
Trelleborg TiresConstruction equipment tires; Port equipment tires; Material handling and forklift tires; Wheels and tire and wheel assemblies

Swipe sideways to see every column.

Taken from each company’s listing in this guide. Most suppliers carry more than is shown here.

On the job

Related article and buying checklist

A Pile Buck article on wear parts and maintenance, and what a supplier will ask you for.

A foundation drilling rig at work on a construction site
Related article · From the Pile Buck library

Wear components and lubricants in foundation drilling

Small parts decide how long a rig keeps working. This Pile Buck article covers wear components, lubricants, and the maintenance habits that cut downtime in foundation drilling.

Topic: Wear parts and maintenance
Read the full story
Buying checklist

Eight things to have ready when you call a supplier

  1. Machine make and model
  2. Part or tire size and the part number, if known
  3. Application and working surface
  4. Load and hours of use per day
  5. Quantity
  6. Current part and how it failed
  7. OEM or replacement part
  8. Delivery location and schedule
FAQ

Frequently asked questions

Short answers. Select a question to open it.

Pneumatic tires ride softer and suit higher speeds. Solid tires cannot be punctured and suit rough, debris-covered sites at low speed. The machine and the surface decide.

The size, the load index or ply rating, and the speed symbol are molded on the sidewall. Give the supplier those markings and the machine model.

Both protect the surface. Polyurethane generally resists cuts and wear longer, and rubber gives more grip and cushion. Ask the supplier which suits your machine and surface.

Measure the wear at regular intervals and compare it with the limits for the machine. Replacing parts as a set often costs less than running worn parts to failure.

It depends on the maker. Ask for the materials, the test data, and the warranty, and compare the total cost over the life of the part.

No. Trelleborg Tires supplies tires and wheels. Everpads makes track pads, undercarriage parts, rubber buffers, and other wear parts.

Join the discussion

Ask a question or share your experience on the job.

Go to the forums
Suppliers

Two suppliers to call

Contact each company directly for pricing, availability, and details for your project.

Everpads

Everpads

Warminster, Pennsylvania
(215) 420-7086

Makes track pads, undercarriage parts, rubber buffers, and other wear parts for construction equipment.

Rubber and polyurethane track pads
Undercarriage components
Rubber buffers for vibratory hammers
Milling teeth, conveyor belts, and auger blades
Full description

Description

Everpads makes replacement parts for construction equipment, including track pads, undercarriage components, and rubber buffers for vibratory hammers. The company was established in 1995, and its U.S. office is in Warminster, Pennsylvania.

Products and services

  • Rubber and polyurethane track pads
  • Bolt-on track pads
  • Undercarriage components: track rollers, idlers, and track chains
  • Rubber buffers for vibratory hammers
  • Milling teeth, conveyor belts, and auger blades
  • Custom wear parts

320 Constance Drive, Suite 5, Warminster, PA 18974

Trelleborg Tires

Trelleborg Tires

Wakefield, Massachusetts

Supplies tires and wheels for construction, port, and material handling equipment.

Construction equipment tires
Port equipment tires
Material handling and forklift tires
Wheels and tire and wheel assemblies
Full description

Description

Trelleborg Tires supplies tires and wheels for construction, port, and material handling equipment. It is part of Yokohama TWS, and its North American office is in Wakefield, Massachusetts.

Products and services

  • Construction equipment tires
  • Port equipment tires
  • Material handling and forklift tires
  • Solid and pneumatic tires
  • Wheels and complete tire and wheel assemblies

107 Audubon Road, Suite 205, Wakefield, MA 01880
[email protected]

Sell tires, tracks, or wear parts? Ask about being listed in this guide.