LATEST ISSUES OF PILE BUCKAll issues →
Buyers Guides › Cranes & Rigging
2027 Buyers Guide

Cranes & Rigging

Compare cranes and rigging equipment and request quotes from two suppliers.

Featured suppliers

Start here

Which equipment for which lift

A quick starting point. Your engineer and the supplier have the final say.

If you needStart withWhyWatch for
Clamshell, dragline, or other continuous heavy workDuty-cycle craneIt is built to repeat heavy cycles all day.Match the line pull and the cycle time to the work.
To load barges or handle scrap and bulk materialMaterial handlerA raised cab and a long reach give fast, repeated loading.Check the reach, the attachment, and the ground or deck under it.
To lift long loads such as piles, pipe, and railSpreader beamIt holds the slings apart and keeps the load level.Check the working load limit and the spread against the load.
To lift with low headroomLift beamA lift beam needs less height above the load than a spreader beam.It bends under load, so it is heavier for the same capacity.
To lift shipping containersContainer spreader or lifting lugsThey lock into the corner fittings of the container.Confirm the container size and the gross weight.
A crane for one projectRentalRenting saves capital and matches the machine to the job.Ask about transport, setup, service, and operator training.
Compare

What each supplier lists

Each company’s range, in its own words, so you know who to call first.

SupplierEquipment
5R / PLM AmericasNew PLM duty cycle cranes; Equipment sales; Parts, service, and technical support; Custom crane solutions
TandemlocSpreader beams, lift beams, and combination beams; Custom beams with a quick-ship program; Container lifting spreaders, slings, and lugs; Pipe lifters, beam clamps, and barrier grabs

Swipe sideways to see every column.

Taken from each company’s listing in this guide. Most suppliers carry more than is shown here.

On the job

Related article and buying checklist

A Pile Buck article on lift planning and safety, and what a supplier will ask you for.

A crane working at a waterfront construction site
Related article · From the Pile Buck library

Lift planning and safety for waterfront and barge cranes

Lifts over water are among the highest-risk jobs in marine construction. This Pile Buck article covers lift planning, barge stability, rigging, and the standards that apply.

Topic: Lift planning and safety
Read the full story
Buying checklist

Eight things to have ready when you call a supplier

  1. The work: lifting, clamshell, pile driving, or material handling
  2. Heaviest load and its dimensions
  3. Reach, height, and headroom
  4. Land, barge, or dock, and the ground conditions
  5. Power: diesel or electric
  6. Buy or rent, and for how long
  7. Standards and inspections required
  8. Project location and schedule
FAQ

Frequently asked questions

Short answers. Select a question to open it.

It is a crane built for continuous, repeated work such as clamshell digging, dragline work, and foundation work. A standard lift crane is built for occasional heavy lifts.

A spreader beam hangs from slings at its ends and mainly carries compression. A lift beam hangs from one point at its center and carries bending. A lift beam needs less headroom.

It depends on the length of the project, how much you will use the crane, and your capital. Renting suits a single project. Buying suits steady, long-term use.

Yes. Tandemloc builds custom beams and has a quick-ship program. Send the load weight, the dimensions, the pick points, and the headroom.

Yes. Below-the-hook lifting devices and rigging must be marked with their rated load and inspected regularly. Follow the standards and rules that apply to your job.

No. 5R Enterprises / PLM Americas sells, services, and supports PLM duty cycle cranes. Tandemloc makes lifting and rigging equipment that hangs below the hook.

Join the discussion

Ask a question or share your experience on the job.

Go to the forums
Suppliers

Two suppliers to call

Contact each company directly for pricing, availability, and details for your project.

5R Enterprises / PLM Americas

5R Enterprises / PLM Americas

Morris, Illinois
815-666-6033

Exclusive North American sales, service, and support for PLM duty cycle cranes.

New PLM duty cycle cranes
Equipment sales
Parts, service, and technical support
Custom crane solutions
Full description

Description

5R Enterprises is the exclusive North American source for sales, service, and support of PLM duty cycle cranes through PLM Americas. The company is based in Morris, Illinois.

Products and services

  • New PLM duty cycle cranes
  • Equipment sales
  • Parts and service
  • Technical support
  • Custom crane solutions
  • Nationwide customer support

1281-C Leah Road, Morris, IL 60450

Tandemloc

Tandemloc

Havelock, North Carolina
(800) 258-7324

Designs and makes spreader beams, lift beams, and container lifting equipment in the USA.

Spreader beams, lift beams, and combination beams
Custom beams with a quick-ship program
Container lifting spreaders, slings, and lugs
Pipe lifters, beam clamps, and barrier grabs
Full description

Description

Tandemloc designs and makes lifting and rigging equipment in Havelock, North Carolina. The company was founded in 1984, and its products are made in the USA.

Products and services

  • Spreader beams, lift beams, and combination beams
  • Custom beams with a quick-ship program
  • Container lifting spreaders, slings, and lugs
  • Pipe lifters, beam clamps, and concrete barrier grabs
  • Coil, roll, and pallet lifters
  • Container casters, stands, and cargo securing hardware

824 Fontana Blvd., Havelock, NC 28532

Sell cranes or rigging equipment? Ask about being listed in this guide.