LATEST ISSUES OF PILE BUCKAll issues →
Buyers Guides › Hoses & Fittings
2027 Buyers Guide

Hoses & Fittings

Compare hoses, couplings, and fittings and request quotes from two suppliers.

Featured suppliers

Start here

Which hose or fitting for which job

A quick starting point. The equipment manual and the supplier have the final say.

If you needStart withWhyWatch for
Hoses for a hydraulic hammer or power unitSpiral-wire hydraulic hose assemblyIt handles high pressure and pressure spikes.Match the working pressure, the size, and the fluid to the machine.
Hoses that drag over steel, rock, or a barge deckHose with an abrasion-resistant cover or a hose guardThe cover wears before the hose does.Check the bend radius with the guard fitted.
To connect and disconnect hydraulic lines oftenHydraulic quick disconnectIt connects fast and limits spills.Match the coupling series, the size, and the pressure rating on both halves.
To connect air lines on an air hammer or compressorAir hose coupling with a safety clip or whip checkAir hose can whip if a coupling lets go.Use safety clips and check the pressure rating.
To move water, slurry, or fuelSuction or discharge hose with cam and groove couplingsThe couplings connect without tools.Match the hose and the gasket material to the fluid.
To pump water out of an excavationLay flat discharge hoseIt rolls flat and is quick to deploy.It is for discharge only, not suction.
Compare

What each supplier lists

Each company’s range, in its own words, so you know who to call first.

SupplierHoses and fittings
ARG IndustrialPile driver hose assemblies; Hydraulic and industrial hose; Fittings, adapters, and quick connects; Rigging and lifting products
DixonHose couplings and fittings; Cam and groove couplings; Hydraulic quick disconnects; Valves, clamps, and hose protection

Swipe sideways to see every column.

Taken from each company’s listing in this guide. Most suppliers carry more than is shown here.

On the job

Related article and buying checklist

A Pile Buck article on hammer maintenance, and what a supplier will ask you for.

A pile hammer being maintained
Related article · From the Pile Buck library

Hammer-specific maintenance schedules

Hoses and fittings are on every hammer maintenance list. This Pile Buck article covers maintenance schedules by hammer type and how to avoid downtime.

Topic: Equipment maintenance
Read the full story
Buying checklist

Eight things to have ready when you call a supplier

  1. Machine make and model
  2. Fluid or material in the hose
  3. Working pressure and temperature
  4. Hose inside diameter and length
  5. End fittings and thread types
  6. Working conditions: abrasion, bending, and weather
  7. Quantity
  8. Delivery location and schedule
FAQ

Frequently asked questions

Short answers. Select a question to open it.

Start with the size, the temperature, the application, the fluid, and the pressure. Suppliers often call this STAMP. Give the supplier all five.

Braided hose is more flexible and suits lower pressures. Spiral-wire hose handles higher pressures and pressure spikes, which is why it is common on pile driving equipment.

Inspect them before each shift. Replace a hose that is cracked, blistered, leaking, kinked, or worn to the wire. Follow the equipment maker’s schedule.

Do not mix coupling halves or crimp fittings unless the makers say they are compatible. A mismatch can leak or let go under pressure.

It is a safety cable that joins two hoses, or a hose and a tool, across the coupling. It limits the whip if the coupling fails.

No. ARG Industrial supplies and builds hose assemblies and also sells rigging. Dixon makes couplings, fittings, valves, and hose accessories.

Pile Buck Forums

Talk hoses and fittings with people who run them

  1. Hydraulic hammer hoses: how long do they last, and what kills them?General Construction forum
  2. Quick disconnects on power units: which style leaks least?General Construction forum
  3. Hose protection on a barge deck: sleeves, guards, or ramps?Marine Construction forum
  4. Air hose safety on air hammers: what do you require?Deep Foundations forum

Join the discussion

Ask a question or share your experience on the job.

Go to the forums
Suppliers

Two suppliers to call

Contact each company directly for pricing, availability, and details for your project.

ARG Industrial

ARG Industrial

Alaska and the Pacific Northwest
206-762-6800

Supplies hose, fittings, and rigging, and builds pile driver hose assemblies.

Pile driver hose assemblies
Hydraulic and industrial hose
Fittings, adapters, and quick connects
Rigging and lifting products
Full description

Description

ARG Industrial supplies hose, fittings, and rigging from locations in Alaska and the Pacific Northwest. It builds pile driver hose assemblies for hydraulic pile driving equipment.

Products and services

  • Custom pile driver hose assemblies with Warthog abrasion-resistant cover
  • Hydraulic and industrial hose
  • Hydraulic fittings, adapters, and quick connects
  • Clamps, tools, lubricants, and sealants
  • Lay flat discharge hose
  • Rigging and lifting products

Alaska and the Pacific Northwest

Dixon Valve & Coupling

Dixon Valve & Coupling

Chestertown, Maryland
877-963-4966

Makes and supplies hose couplings, fittings, valves, and accessories.

Hose couplings and fittings
Cam and groove couplings
Hydraulic quick disconnects
Valves, clamps, and hose protection
Full description

Description

Dixon makes and supplies hose couplings, fittings, valves, and accessories. The company is based in Chestertown, Maryland.

Products and services

  • Hose couplings and fittings
  • Cam and groove couplings
  • Hydraulic quick disconnects and adapters
  • Valves
  • Hose clamps and hose protection
  • Loading arms and swivels

Chestertown, MD 21620