- Are you licensed for this work in my state?
- What is your bonding capacity?
- What insurance do you carry?
- What is your safety record, including your EMR?
- Which parts of the work do you self-perform, and which do you subcontract?
- What equipment and crew will you put on this job?
- What similar projects have you completed, and can I call the owners?
- Who will run the job on site?
Helical Pile Installation
Compare helical pile installation contractors and request bids from companies.
Featured contractors
Which helical pile contractor for which job
A quick starting point. Your engineer and the contractor have the final say.
| If you need | Start with | Why | Watch for |
|---|---|---|---|
| A new foundation on soft or filled ground | A contractor with helical pile experience and an engineer on the design | Helical piles reach a bearing layer below weak soil. | Share the soil report. Cobbles, boulders, or shallow rock may call for another system. |
| Support under an existing foundation | A contractor that installs helical underpinning with brackets | Piles and brackets transfer the load to deeper soil. | Ask how the lift or the stabilization is monitored. |
| Equipment pads, generator yards, or pipe racks | A contractor that installs to engineered drawings and keeps torque records | The work repeats, and each pile needs a record. | Confirm the torque logs and the load tests the specification requires. |
| Work close to an existing or operating building | A contractor with compact equipment | Helical piles install with little vibration and little spoil. | Check the headroom and the access for the equipment. |
| A waterfront or erosion-sensitive site | A contractor with coastal experience | Small equipment and no concrete cure time suit sensitive sites. | Ask about corrosion protection and permits. |
| Ground-mount solar or modular buildings | A contractor that can install repeating layouts | Helical piles can be loaded as soon as they are installed. | Agree on the layout tolerances and the testing rate. |
What each contractor lists
Each company’s service area and services, in its own words, so you know who to call first.
| Contractor | Service area | Services |
|---|---|---|
| Titan Helical Expert | Ask the company | Helical pile foundations; Equipment pads and yards; Modular buildings and solar arrays; Torque logs and load test reports |
Swipe sideways to see every column.
Taken from each company’s listing in this guide. Most contractors offer more than is shown here.
What to ask a contractor
Good contractors answer these without hesitation.
Related article and hiring checklist
A Pile Buck article on helical pile applications, and what a contractor will ask you for.

From residential to industrial: where helical piles are used
Helical piles support everything from waterfront homes to industrial structures. This Pile Buck article covers the main applications and what to consider for each type of project.
Read the full storyEight things to have ready when you call a contractor
- Design loads: compression, tension, and lateral
- Soil report or boring logs
- Number of piles and the layout
- Drawings and the specification
- Site access and headroom
- Torque log and load test requirements
- Corrosion protection required
- Your schedule
Frequently asked questions
Short answers. Select a question to open it.
The installer screws the piles into the ground with a hydraulic drive head, records the installation torque, and connects the piles to the structure.
Installation torque is measured as the pile goes in and is correlated to capacity. Many projects also require load tests. The specification sets what is required.
Ask for a torque log and an installation record for every pile, and load test reports where the engineer specifies testing.
Very heavy column loads, or ground with cobbles, boulders, or shallow rock, may call for another foundation system. Ask your engineer.
An engineer designs the piles from the loads and the soil report. Ask the contractor who stamps the design.
See the Helical Piles buyers guide on Pile Buck for manufacturers and distributors.
Talk helical piles with people who install them
- Helical piles or driven piles: when does each win on your jobs?Deep Foundations forum
- Helical pile torque and load tests: how much do you rely on torque correlation?Deep Foundations forum
- Helical piles in tight access: what equipment has worked for you?Deep Foundations forum
- Working in limited headroom: what rigs and methods have worked?Deep Foundations forum
One contractor to call
Contact each company directly for pricing, availability, and details for your project.

Titan Helical Expert
772-473-3165
Installs helical pile foundations with a torque log and an installation record for every pile.
Full description
Description
Titan Helical Expert installs helical pile foundations to engineered drawings. Every pile comes with a torque log and an installation record, plus load test reports where the engineer specifies testing. It is led by a Florida Certified General Contractor with more than 15 years of experience in helical piles, excavation, and sitework.
Services
- Helical pile foundations installed to engineered drawings
- Generator and transformer pads
- Equipment yards and pipe racks
- Modular and prefab buildings
- Utility, substation, and solar array foundations
- Torque logs, installation records, and load test reports












