Now Reading
Culvert Drainage Restoration | DelDOT
Volume 40 Issue 4
Volume 40 Issue 3
Volume 40 Issue 2
Volume 40 Issue 1
Volume 39 Issue 6
Volume 39 Issue 5
Volume 39 Issue 4
issue 39-3
Volume 39 Issue 3
Volume 39 Issue 2
Issue 39-1 - Jan/Feb 2023
Volume 39 Issue 1
Issue 38-6 - Nov/Dec 2022
Volume 38 Issue 6
Issue 38-5 - Sep/Oct 2022
Volume 38 Issue 5

Culvert Drainage Restoration | DelDOT

To effectively address the Culvert’s drainage challenges at hand, the proposed solution included the drilling of 16 new weep holes, each 26 inches deep, and the insertion of 16 units of the JET Filter 4” diameter open-end drainage system.

Drainage Dilemma

The Culvert at Deep Creek in Middletown, Delaware, posed a distinct challenge for the Delaware Department of Transportation (DelDOT). This aging culvert demanded immediate attention to rectify drainage issues that were leading to damage and degradation of the culvert. In response, the Delaware Department of Transportation (DelDOT) pursued restoring the drainage functionality to the bridge culvert, using the innovative JET Filter System.

Clean Water Passing through JET Filter DELDOT Culvert

Solution

In order to effectively address the drainage challenges at hand, the proposed solution included the drilling of 16 new weep holes, each 26 inches deep, and the insertion of 16 units of the JET Filter 4” diameter open-end drainage system. This distinctive filtration system, designed for optimal performance in restoring bridge culvert drainage, was chosen for its ease-of-installation, durability, conical shape providing 200% more surface area compared to traditional weep holes, and its ability to prevent soil loss behind the culvert wall.

Coring a hole for JET Filter Install

Paired with Mirafi® Filter-weave FW 300 to prevent clogging and soil loss, each JET Filter not only ensured efficient filtration but also facilitated optimal drainage. One of the units achieved an impressive drainage rate of 2.5 gallons per minute (GPM), highlighting our unwavering commitment to utilizing top-tier materials that meet the rigorous standards of a culvert restoration initiative.

Jet Filter Install DELDOT Culvert

The implementation of Deep Creek’s culvert restoration initiative, led by Mumford and Miller Concrete Inc., demonstrated precision and strict compliance with industry best practices. The methodical drilling of new weep holes and the systematic installation of JET Filter units were executed with attention to detail, guaranteeing optimal placement to achieve both efficient drainage and enduring structural integrity.

JET Filter Installed DELDOT Culvert

At a Glance

Project Location: Middletown, DE

Contractor: Mumford and Miller Concrete, Inc.

  • Culvert with urgent drainage issues, affected the bridge abutment
  • 16 units of Jet Filter 4″ diameter open- end 316 Stainless Steel Housing Geotextile Filter Media: Mirafi® Filter- weave FW 300 installed
  • Restored drainage to the bridge abutment and fortified the culvert

Street View: https://bit.ly/3QZkcDa

Check out the Video

 

Product UsedJet Filter Drainage System 6 inch Open End

4” OPEN-END 316 STAINLESS STEEL HOUSING

Part #: JF4SS

Scroll To Top
NuCore Skyline