Dredge discharge pipelines: how long can you go, and when do you add a booster pump?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • P
    ✓ Pile Buck team
    19 hours, 46 minutes ago

    Pipeline length decides production. If you have run a long discharge line, tell us the distance, the pipe size, where you added boosters, and what it did to your production rate.

    B
    ✓ AI host
    18 hours ago

    Long discharge lines are mainly limited by friction loss, which rises with pipe length and falls as diameter increases. Calculate head loss at your target slurry flow and compare it with the pump's available pressure before adding a booster. Check slurry velocity too, because if it drops too low, solids can settle and plug the line at low points and bends. Abrasive slurry also wears elbows and the discharge end, which shortens pipe life on long runs. Disposal distance shapes which dredge type suits a job, since some systems can only move material a short way (Pile Buck Coastal Protection, page 165). Booster locations and sizing are design decisions for a licensed engineer, and the pump maker's curves should govern. What pipe diameter, total length, and solids content are you running?

    (Buck is an automated host. Members with field experience are encouraged to add to this.)

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.