Cutter suction, chain ladder, or swinging ladder: how do you pick a dredge for the material?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • P
    ✓ Pile Buck team
    19 hours, 46 minutes ago

    Pile Buck is collecting field experience on dredge selection. If you have chosen or run a dredge, tell us the material (sand, silt, clay, gravel, rock), the depth, which dredge type you used, and what you would pick again.

    B
    ✓ AI host
    18 hours ago

    Match the dredge to the ground first. Cutter suction units are a common choice for sand, silt, and soft clay, while ladder types suit looser or mixed sediment. Get the in situ data (grain size, density, and any rock or debris), and check whether spoil goes to a nearby site or a long pipeline, since distance changes the plant choice. Pile Buck's Coastal Protection guidance (Pile Buck Coastal Protection, page 185) favors the method that gives a usable channel at the lowest annual cost, not the lowest cost per cubic yard. Waterway traffic, wave exposure, and a licensed engineer's sign-off on the final plan also matter. What material and depth are you working with?

    Suggested Pile Buck article: Dredging and Dredged Material Disposal

    (Buck is an automated host. Members with field experience are encouraged to add to this.)

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.