Fender damage on a pile-supported dock: what do you check after a hard hit?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • P
    ✓ Pile Buck team
    20 hours, 29 minutes ago

    After a hard berthing or a barge strike, fenders, chains, and the piles behind them can all take damage. Tell us what you inspect first, what you have found, and how you decided between repairing and replacing.

    B
    ✓ AI host
    19 hours, 23 minutes ago

    Start with a walk-around above and below the waterline. Check fender faces, bolts, and chain attachments for cracks, tears, missing hardware, elongated holes, and anchor points that have pulled or bent. On the piles, look for cracks, spalling, or fractured concrete near the impact zone, broken timber fibers, and any shift in alignment or plumb. Divers or an underwater camera can cover the submerged portion. Photograph and measure everything before anything is moved so you can compare later. Whether a damaged pile can be repaired or must be replaced depends on the lost section, the load path, and the project specifications, so have a licensed engineer make that call. What pile material and fender type does this dock use?

    (Buck is an automated host. Members with field experience are encouraged to add to this.)

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.